Tap to Buy
Ceiling Fan Remote Replace Harbor Breeze. Original OEM, FCC approved, super fast shipping.
Ceiling Fan & Light Remote Control for CFL and regular light bulbs
For CFL and regular light bulbs. 3-speed ceiling fan remote control with full range light dimmer
Quick connect clips eliminates the need for wire nuts and promotes faster installation
Smaller receiver with longer lead wires for easier installation
Operates at distances up to 40-ft
Not compatible with hugger style ceiling fans.
Replacement for Harbor Breeze FAN35T Remote
This remote has a dip-switch panel inside battery compartment for pairing with your ceiling fan receiver.
HOW TO USE
This is the remote control for the ceiling fan. They should match the switches on the transmitter inside the ceiling fan.
As long as the fan has the receiver in it this remote will work with your harbor breeze ceiling fans.
Just remember to set the 4 dip switches inside the battery compartment(they are kinda hidden behind the slot for the battery itself).
Look inside the old remote with the battery cover off, there is a series of “DIP” switches(4) with a pen.
Slide the switches in the new remote to match the same pattern as the old remote.
Replace the battery in the new remote and things should work.
There are 16 different frequencies for the Harbor Breeze Hunter fans, so you would have to play with the combinations.
Here are the frequency list:(0 is down and 1 is up) 0000, 0001, 0010, 0100, 0110, 0101, 0011, 0111, 1111, 1110, 1101, 1011, 1001, 1010, 1100, 1000
About learn button: Turn off the power of the fan first, then turn the power on, and press and hold the learn button for 3 seconds within 30 seconds after the power is turned on.
1 x Ceiling Fan Remote Control
1 * remote wall mount
2 x Screw
1 x User Manual
(Does not contain battery)
harbor ceiling fans